Eero 6 Plus Review | PCMag


The latest iteration of Eero’s easy-to-use Wi-Fi mesh system, the Eero 6 Plus ($139 for one node, $239 for two nodes, or $299 for a three pack) uses Wi-Fi 6 technology and 160MHz channel width to deliver speedy wireless networking throughout your home. We tested the three-piece system, which provides coverage for homes of up to 4,500 square feet. It was a snap to install and delivered excellent performance in our tests, and it pulls double-duty as a home automation hub. All of this earns it an Editors’ Choice award for Wi-Fi 6 mesh systems.


A Mesh Network With the Latest Wi-Fi 6 Tech

The Eero 6 Plus three-pack uses three identical, low-profile nodes to provide 4,500 square feet of coverage (1,500 square feet per node). At 2.6 by 3.9 by 3.8 inches (HWD), these nodes are noticeably smaller than the nodes that come with the Eero Pro 6 (2.1 by 5.3 by 5.3 inches), though about the same size as the Eero 6 nodes (2.4 by 3.9 by 3.8 inches). The nodes of all three Eero systems have the same basic curvy design and white finish.

PCMag Logo

You Can Trust Our Reviews

Since 1982, PCMag has tested and rated thousands of products to help you make better buying decisions. (See how we test.)

Eero 6 Plus router in living room

This system doesn’t offer the USB and multi-gig connectivity that you get with the Asus ZenWiFi AX XT8 system. Instead, each node is equipped with two auto-sensing gigabit LAN ports and a power port, all of which are located on the back panel. A small LED indicator on the top of the node glows white when everything is connected and working properly, glows blue during setup, and glows red when the node has lost its internet connection.

The Eero 6 Plus is a dual-band AX3000 system, which means it can hit a combined (theoretical) maximum data rate of 3,000Mbps. It supports all of the latest Wi-Fi 6 technologies, including WPA3 encryption, Orthogonal Frequency-Division Multiple Access (OFDMA) data transmissions, MU-MIMO simultaneous data streaming, and direct-to-client signal beamforming. New to this system is support for 160MHz channel transmissions; the older Eero Pro 6 and Eero 6 lack it.

The Eero 6 Plus is not a Wi-Fi 6E mesh system. The first Eero to use the new Wi-Fi 6E standard (which adds 6GHz data…

Source…